






-To adapt this to your FDF kit, you will only need the adaptor bracket (unless you want to add the other options for replacements or spares)
-To adapt this to other angle kits you will need the outer rod end AND the tierod adaptor
-Angle, 65 degrees (depending on control arm setup)
-Ackerman, +2 degrees to -2 degrees of Ackerman (and everything in between) when measured at full lock
-Bump steer, corrected by perfecting tie-rod offset LCA ball joint
-Caster, factory caster when using stock UCA or adjustable caster when paired with FDF UCA
-Camber, optimized camber at -5.5 to counteract caster at full lock.
-Track Width, adjustable range from 25mm-50mm wider per side creating a stable and high clearance front end
-Suspension Travel, long travel range, full lock to full lock at any point throughout suspension travel
-Joints, Chromoly heim joints, and spherical bearings with self-lubricating nylon race, easily replaceable
-Weight Reduction, scissor frame constructed alloy steel, 7075 aluminum used where possible
Please allow 2 weeks build time for this product