Steering Column kit

$555.29

Steering column kit includes the following:

-Bolts to any 1.5 inch roll cage tubing

- 44" of steering shaft

- 1 column mount

- 1 sweet u-joint

- 1 firewall bearing

- 1 quick release "Option"

Quick Release

$118.97

Quick Release:

Splined Quick Release with weld on male side to adapt to any 3/4" steel steering shaft.

FDF Billet Steering Column Mount

$90.85

FDF Steering Column Mount:

Sturdy Billet 6061 aluminum steering column mount with 3/4" heim joint

Clamp is for 1 1/2" tubing dash bar

Chromoly Heim Joint

$52.87

Chromoly Housing, 3 piece high-performance Teflon race

Bearing Race: 3 piece teflon

Ball: heat treated, hard chrome plated bearing steel

Finish: bright polished chrome

Housing: 4130 heat treated chromoly steel

Application: Our Chromoly rod ends are ideal for automotive after market suspensions such as control arms, end links and ball joints.

Ultimate Static Load Rating 3/4 : 25,489 lbs

Ultimate Static Load Rating 5/8 : 19,751 lbs

FK Rod End/ Heim Joint

$47.23

The FK rod end bearings are the premium option for our angle kits that offer supior bearing life, extreme strength and a smooth feel. We offer them in 2 sizes, both left hand (LH) and right hand (RH).

The JMX10 is a PTFE lined 5/8-18 bearing with a yield strength of 17,959 lbs.

The JMX12 is a PTFE lined 3/4-16 bearing with a yield strength of 28,090 lbs.

Solid Heim joint/rod end

$28.04

3/4-16 Solid heim joint, commonly used for joint applications that need to be clamped instead of a free range of motion joint.

Female Heim

$34.05

Chromoly Cup Kit

$39.75

Kit Includes: One uniball cup (machined tubular bushing), one uniball bearing (spherical plain bearing), and one snap ring

Uniball Bore: 3/4 bore

Cup OD: 1.750 inch

Cup ID: 1.4375 inch

Cup Height: 1.169 inch

Cup Material: 4130 Chrome Moly

Other Common Names: Weldable monoball, spherical plain bearings, com bearing

Applications: Spherical Plain Bearings are used as sway bar end links, linkage ends and control arms. The Uniball/spherical plain bearing housing is plated, so instead of being welded to a connecting bar or connecting tube, the spherical plain bearings are held within a control arm housing or tubular bushing with snap rings. A ball stud or mounting stud is normally assembled thru or staked into the i.d. of the ball.

Adjuster Nut

$85.13

Jack Screw

$31.44

3/4-16RH thread with a 1" hex in the center and a 3/4-16LH thread made from 4140 chromoly and zinc plated

commonly used for adjusting the length of control arms, another name for these are ladder adjuster.

Adjustable Link

$51.09

Adjustable Link (tierod)

-Choose your size & length

Shackles

$29.51

Heim Joint Spacers/Misalignment spacers

$40.88

We are offering - misalignment spacers for heim joints/rod ends/rose joints

(HM) = High Misalignment

(NH) = Not High Misalignment

(SS) = Stainless Steel

(AL) = Aluminum

we machine these from stainless steel and aluminum for all of our products and have an inventory of 10 000 spacers in various sizes.

the price is per pair of spacers (2) because for any application you will need 1 spacer on either side of the heim joint.

Heim Joint Size is the size of the heim joint the spacer is meant to fit in

Hole Size is the hole size for the bolt to go through the spacer

Width Per Spacer is the meassurement from shoulder to shoulder of one spacer

Overall Width is 2 of the same spacers in the heim joint

Custom Order if none of the options work for you we can do custom spacer but lead time is 3-4 weeks and a minimum purchase order is required, if you are looking for custom meassurements please contact us before ordering