IS300 / JZX90 / JZX100 Mini Mantis Angle Kit
Regular price $992.69 Save Liquid error (snippets/product-template line 117): Computation results in '-Infinity'%The IS300 / JZX90 / JZX100 Mini Mantis angle kit is a unique option for the chassis, that utilizes a lower control arm adaptor, and steering knuckle adaptor. this design gives the the chassis's a control arm extension of 35mm, and bolts on, no cutting or welding anymore to lengthen the stock arm. the other benefit is the knuckle adaptor, gives you roll center correction and a shorter steering ratio for increased angle. it is ackermann adjustable, and has an integrated bump stop to adjust for your angle needs. These items can also be used to further evolve the kit in to our MILD or even our MEGA mantis kit, as they utilize a lot of the same parts. Â
The MINI kit can be used with factory or aftermarket caster/compression arms, if you want to run the FDF compression arms, you can order separately later on.
Â
-Angle, 55 degrees + depending on your steering rack offset and wheel setup
 -Tie-rods, the kit includes tie rod adaptors to connect to the knuckle
 -Ackermann, adjustable ackermann (other settings offered upon request)
 -Roll Center, optimized handling by adding 30mm of roll centre correction
 -Bump steer, corrected bump steer for a lowered ride height
 -Caster, optimized caster and trail for the best alignment torque feedbackÂ
 -Camber, optimized camber ranging from -3 to -6
 -Track Width, 35mm wider per side creating a stable and high clearance front end
 -Suspension Travel, long travel range, full lock to full lock at any point throughout suspension travel for increased gripÂ
 -Joints, Chromoly heim joints and spherical bearings with self lubricating nylon race, easily replaceableÂ
 -Weight Reduction, compact drop knuckle design makes for a lighter and stronger design, scissor frame constructed arms with crumble zone to save mounting points from failing under impact, 7075 aluminum used where possible which provides steel like strength at 40% weight reduction.Â
Â
NOTE* this kit must be run with some form of adjustable upper control arms or extended upper control arms to have the recommended camber range of -3 to -6 degrees (-6 is the maximum we recommend)Â
Â
Please allow 2-3 weeks of fabrication before the item is sent.
IS300 / JZX90 / JZX100 Mega Mantis Angle Kit
Regular price $2,330.00 Save Liquid error (snippets/product-template line 117): Computation results in '-Infinity'%The all new Mega Mantis kit for the IS300 / JZX90 / JZX100. Featuring full ON-CAR adjustable LCA to match the high clearance compression arm and have easy track side camber/track width adjustment. The next component is the knuckle adapter itself, which includes a 40mm drop, adjustable ackermann, and adjustable bump stop. It connects in the factory ball joint location on the knuckle but also grabs one of the brake caliper ears for additional strength. The third component is the high clearance compression arm. This part is ON-CAR adjustable to dial in your caster, and attaches underneath the control arm for tierod clearance and wheel clearance. These three pieces are what will give your chassis better track width, handling and steering angle. The kit also Includes fully adjustable Upper Control arms to help dial in your alignment and give you that extra adjustability.
Â
 -Angle, 65 degrees + depending on your steering rack offset and wheel setup
 -Tie-rods, the kit includes tierod adaptors to connect to the knuckle
 -Ackermann, adjustable ackermann (other settings offered upon request)
 -Roll Center, optimized handling by adding 40mm of roll centre correction
 -Bump steer, corrected bump steer for a lowered ride height
 -Caster, optimized caster and trail for the best alignment torque feedbackÂ
 -Camber, optimized camber ranging from -3 to -6
 -Track Width, 50mm wider per side creating a stable and high clearance front end
 -Suspension Travel, long travel range, full lock to full lock at any point throughout suspension travel for increased gripÂ
 -Joints, Chromoly heim joints and spherical bearings with self lubricating nylon race, easily replaceableÂ
 -Weight Reduction, compact drop knuckle design makes for a lighter and stronger design, scissor frame constructed arms with crumble zone to save mounting points from failing under impact, 7075 aluminum used where possible which provides steel like strength at 40% weight reduction.Â
Â
Please allow 2-3 weeks of fabrication before the item is sent.
IS300/JZX90/JZX100 High Clearance Compression Arms
Regular price $447.53 Save Liquid error (snippets/product-template line 117): Computation results in '-Infinity'%ONLY WORK WITH OEM LOWER CONTROL ARMSÂ OR OUR FDF JZX/IS300 MINI KITÂ
These high clearance compression arms bolt to the factory front lower control arm. Instead of going overtop of the tierod like the OEM compression arm, this arm is designed to go underneath. This allows for more wheel clearance at full lock. It features an on car adjustable joint so caster is easily dialed in without removing any components. The arms can be used with modded knuckles or other angle kit adaptors, or with our FDFÂ mini kit.
All hardware required to install is included.
JZX100 Chaser / Mark II / Cresta Rear Lower Control arms (RLCA)
Regular price $435.34 Save Liquid error (snippets/product-template line 117): Computation results in '-Infinity'%Â
For Custom color options select "Custom color" and leave in the comments at your checkout what you want the powder coat to be. we use Prismatic Powder for reference.Â
JZX100 Chaser / Mark II / Cresta Rear Traction Arm
Regular price $399.33 Save Liquid error (snippets/product-template line 117): Computation results in '-Infinity'%Â
For Custom color options select "Custom color" and leave in the comments at your checkout what you want the powder coat to be. we use Prismatic Powder for reference.Â
JZX100 Chaser / Mark II / Cresta Rear Toe Arm
Regular price $338.44 Save Liquid error (snippets/product-template line 117): Computation results in '-Infinity'%Â
FDF Toe Plates
Regular price $109.47 Save Liquid error (snippets/product-template line 117): Computation results in '-Infinity'%The FDF Toe Plates are the quickest and simplest way to measure toe at home or at the track.
You can choose to buy with or without two Lufkin measuring tapes.
Please allow 1 week before shipping.
Mantis Angle Fender Sticker
Regular price $22.69 Save Liquid error (snippets/product-template line 117): Computation results in '-Infinity'%-Comes in pair
-Universal fit
-High quality wrap sticker
Winters Quick Change Weld in Mount JZX100 Chaser / Mark II / Cresta
Regular price $522.63 Save Liquid error (snippets/product-template line 117): Computation results in '-Infinity'%The FDF winterquick change mount is a weld in option that increases the strenth of the original subframe, maintaines its structure even when the diff is removed, and provides a easy to remove front nose mount that bolts to the subframe and the diff. Because the parts are made of high strength allow steel we are able to make this a light weight while still very strong design. The option for us to weld the parts together means you will get the rear blue mount as 1 welded piece and the front blue mount as 1 welded piece. If you want to weld these together yourself, there will be a total of 5 individual pieces, that will have alignment tabs for easy fabrication.Â
JZX90/JZX100/IS300 Rack Relocation
Regular price $334.88 Save Liquid error (snippets/product-template line 117): Computation results in '-Infinity'%Now offering a rack relocation kit for the JZX that moves the rack forward. This kit effectively shifts the rack 1.45" (37mm) forward and includes solid rack bushings and a clamp. By implementing this modification, you can greatly reduce the deflection of the original equipment manufacturer (OEM) rack, eliminating the need for offset rack spacers. This enhancement is essential for achieving a more solid and responsive steering feel while preventing binding or over-centering at full lock.
The relocation plate is intelligently designed with precise location geometry, aligning perfectly with the subframe's ribs and features. Installing the kit correctly is made easy, requiring only a couple of hours and basic fabrication skills.
Utilizing advanced 3D scanning technology, we have meticulously crafted this plate to ensure a perfect fit and simulate the installation process. Our thorough design process guarantees optimal performance and compatibility.
Universal Spline Sway Bar Kit
Regular price $496.93 Save Liquid error (snippets/product-template line 117): Computation results in '-Infinity'%Introducing the FDF Sway Bar Kit, an innovative solution that simplifies the process of creating a custom sway bar for your race car. Our kit features precision-machined components, meticulously crafted in-house to ensure superior quality and performance. With this comprehensive kit at your disposal, you'll have everything you need to construct a custom sway bar, from start to finish.
The FDF Sway Bar Kit includes all the complex parts required to build a top-of-the-line sway bar, along with convenient links to help you source any additional materials you may require. Whether you prefer to purchase materials locally or through the McMaster-Carr website, we've got you covered.
To further assist you in customizing your sway bar, we offer a range of options to choose from. Simply refer to the detailed information provided below and select the options that best meet your specific needs.
For a visual demonstration of how our kit can be utilized in your build, we encourage you to check out our video link, showcasing how we used the FDF Sway Bar Kit in our C6 Corvette build.
Invest in the FDF Sway Bar Kit and take your race car to the next level of performance and precision.
Included Parts
-2 Female spline ends
- 2 Male Spline ends
- 4 locking bolts
- 2 blades (6",8" or 10")
Â
OptionalÂ
-sway bar link kit
Â
Need to purchase partsÂ
- sway bar material (4130 1.25x.120 tubing)
- housing material (DOM or 4130 1.75 x .120 tubing)
 Please allow 2-3 weeks for shippingÂ
Â
TOYOTA CHASER JX100 FDF EXTENDED FRONT + REAR BRAKE LINE KIT
Regular price $225.81 Save Liquid error (snippets/product-template line 117): Computation results in '-Infinity'%Front brake lines are all extended 3" longer than OEM
Each HEL Performance brake line kit is assembled in-house from the finest quality stainless steel fittings swaged directly to hard drawn tensile stainless steel braided hose. The kit includes brake lines for the front and rear of the car.Â
With our extensive automotive listings the complete kit will be manufactured to exact specifications, guaranteeing the look, the quality and the performance you demand.
HEL Brake line kits eliminate that 'spongy' feeling often found with rubber hoses under extreme braking conditions - the time when performance is needed the most. By replacing the original rubber hoses with our complete system you will remove this sponginess and your braking will deliver new levels of precision.
Don't risk using inferior brake lines when you can trust us to improve braking reliability and performance - We use stainless steel in our lines and our fittings. Most competitors use zinc plated fittings which are at risk from corrosion.
Like for like replacements for the standard flexible brake hoses on your vehicle.