Supra/ Soarer

The Mantis angle kit for the Supra/Soarer is the most relevant angle kit in today's drift society, and here's why:

-Angle, 70+ degrees 

-Ackerman, Anti/Pro ackerman adjustable

-Roll Center, 50mm Roll center adjustment

-Bump steer, minimal bump steer in drift by perfecting tie-rod pitch angle

-Caster, optimized caster for lead and trail wheel contact, with built in trail to the knuckle adaptor

-Camber, optimized camber at to counteract caster at full lock. 

-Track Width, adjustable range from 50mm-75mm wider per side creating a stable and high clearance front end

-Suspension Travel, long travel range, full lock to lock at max droop and max compression

-Joints, Chromoly 3 piece Heim joints and spherical bearings

-Weight Reduction,  7075 aluminum and Alloy steel used wherever possible for the lightest and strongest design.

Full kit

2- mantis LCA

2- mantis UCA

2- inner tie rods 

2- knuckles adaptors

2- outer tie rods  

All hardware required for install included.

Please allow 2-3weeks of fabrication before the item is sent.

Choose from the available options to get what you need for the rear of your car, all parts are constructed from alloy steel, every arm is on-car adjustable (meaning you do not need to remove any bolts to lengthen or shorten the arms). 

This is the best way to dial in grip and correct the alignment for the best performance your car is capable of. 

 Select through the options to see the photo of each arm set

please allow 2-3 weeks of fabrication time

-Comes in pair

-Universal fit

-High quality wrap sticker