Coilovers

Introducing the Grassroots Performance line of Street & Track Coilovers for a variety of makes and models. This is an affordable set of coilovers tested on both daily use and under race conditions. Please allow up to 10 business days processing for models that aren't in stock. Call us at 416-848-9251 or send us your suspension requirements at info@grassrootsparts.com

Recently featured in the "Performance Auto & Sound" SEMA 2018 Issue. View the featured article here. 

1 Year Replacement Warranty

Many Models are available Made-to-order, Allow 10-14 days processing for production call us for further information.

Specs

• Track Enthusiast Level
• Mono Tube Construction
• 10K Front 7K Rear Spring Rate, Custom Spring rates are available upon request
• 45MM Pistons
• 32 Stages of Dampening Levels
• Full Body Height Adjusting
• Track tested & approved

Direct-fit BRZ, FRS and GT-86 Grassroots Performance "Type 1" Coilovers

This "Type 1" set of coilovers has been designed and tested for daily street and drift or road race conditions. Proven track performance is delivered by the mono-tube construction, custom valving, specced spring rates, and adjustable camber top plates. 32 stages of dampening to dial in your driving style and vehicle response. Even at low ride height setups, this is reliability without sacrificing your ride quality. "Type 1" coilovers help maximize your stance with full-bodied adjustable bottom mount. A perfect match to your new Angle Kit or Brake Kit.

FITS ALL 2013+ Models

Recently featured in the "Performance Auto & Sound" SEMA 2018 Issue. View the feautured article here. 

1 Year Replacement Warranty

Specs

• Track Enthusiast Level
• Mono Tube Construction
• Custom Spring rates are available upon request
• 45MM Pistons
• 7K Front 6K Rear spring rate
• 32 Stages of Dampening Levels
• Allen Key Dampening Control
• Full Body Height Adjusting
• Anodized & Powder coated components
• Track tested & approved
• For 2013+ Models

SAVE $200 when you purchase with the FDF FRS / BRZ Mantis Angle Kit

The "BASE KIT" includes the following

-Custom knuckles
(50mm roll center corrected, adjustable ackerman, 40%weight reduction, double shear spherical bearing pick up and added trail to work with the reduced caster)
- Lower control arms
(adjustable in length and caster, these lower control arms reach out to +75mm over stock length)
- Outer Tierods (sperical bearing outer ball joint with 2024 aluminum adjuster)
-Caster plates (new plates for your coilover top that moves the top of the coilover out as far as legally possible, and reduces caster for less bind, less camber gain through lock, and better contact patch during drift)
-All hardware required for install


The "FULL KIT" includes these additional pieces to the base kit

-Inner Tierods
-adjustable offset rack spacer (an offset rack spacer that allows for a spherical bearing to be used, and offers adjustable setting for rach offset)
-weld on plates for subframe (instructions included in purchase of kit)

The "POWER KIT" includes these additional pieces

this kit is in development to implement the s-chassis power steering rack for hydraulic power steering. 

-steering rack weld in mounts
-subframe braces
-different knuckles to suit the changed rack location

The BC Racing BR Series offers the most affordable entry into Coilover suspension without sacrificing performance, comfort, build quality, vehicle height, or handling. This is done by extensively testing each vehicle then refining the Coilover characteristics as many times as needed to ensure the most well-balanced and affordable aftermarket suspension conceivable. BC Racing takes great pride in choosing spring rates for our off-the-shelf kits that strike the perfect balance between comfort and performance so you're never stuck with an oversprung suspension like many other brands sell. BC Racing offers one of the widest ranges of damping adjustment with 30-clicks of compression/rebound adjusted simultaneously on the BR Series. With meticulously chosen spring rates, damper valving, and one of the widest adjustment ranges in the industry, you can't go wrong with the BC Racing BR Series Coilover System.

• Highly Customizable
• Mono-Tube Shock Design
• Linear Piston And Damping Curve
• Height Adjustment Independent Of Spring Compression
• 30-Clicks Of Simultaneous Compression/Rebound Adjustment
• Front Camber Plates Standard On Applicable Kits
• Rear Camber Plates Available For Applicable Kits
• Custom Spring Rates And Swift Springs Available
• Custom Valving Or Valving Paired For Custom Spring Rates
• 1-Year Warranty Against Manufacturers Defect
• Fully Rebuildable