The Mantis Kit for the Genesis is the most relevant angle kit in today's drift society, and here's why,
-Angle, 65 degrees+ depending on wheel size and track width
-Ackerman, Adjustable ackerman
-Roll Center, optimized handling by adding 50mm of roll center correction
-Bump steer, minimal bump steer in drift by perfecting tierod pitch angle
-Caster, added trail and reduced caster which adds more grip by increasing tire contact patch, causes less bump steer, less jacking from lock to lock, increase transition speed, effortless transition while on throttle
-Camber, optimized camber ranging from -3 to -6
-Track Width, 50mm wider per side creating a stable and high clearance front end
-Suspension Travel, long travel range, full lock to full lock at any point throughout suspension travel for increased grip
-Joints, Chromoly heim joints and spherical bearings with self lubricating nylon race, easily replaceable
-Weight Reduction, compact drop knuckle design makes for a lighter and stronger design, scissor frame constructed arms with crumble zone to save mounting points from failing under impact, 2024 aluminum used where possible which provides steel like strength at 40% weight reduction.
2 weeks waiting time for custom colors
For custom colors, email your order number and the color wanted
Please allow 2-3weeks of fabrication before the item is sent.
Hyundai Genesis dual caliper brackets
Dual caliper bracket for the Genesis,
comes with required hardware to install
fits both brembo and none brembo calipers
please allow 2 weeks for fabrication before the product ships
Hyundai Genesis hydro mount plate
The hyundai genesis hydro plate allows your to easily bolt a handbrake in your car using the factory shifter holes provided.
this bracket will require you to either trim or remove your center console plastics
Universal hood vent
Universal hood vents! select from the sizes below, or send us an email for a custom size.
We can also scale the available sizes to fit your application. for example, if you wanted the Curved design, but only 24" tall, we would simply scale it down to that size. the width's will also get smaller with the scale.
The FDF Toe Plates are the quickest and simplest way to measure toe at home or at the track.
Comes with two Lufkin measuring tapes
please allow 1 week before shipping
Tie rod body for Mantis kits
Our rigid tierod for the FDF Mantis kits,
Quantity- Price is for 1 tierod
Material- 2024 Aluminum
Benefits over regular tierods
very stiff design, does not flex like the thin steel tierods, this improves handling
machined fail point to save your steering rack on impact
stronger than steel but super lightweight
we have 4 Lengths that current go with there corresponding angle kits, please select one of the 4 options for your kit
1- 9" long
2- 9.5" long
3- 10.25" long
4- 11.5" long
Chromoly Heim Joint
Chromoly Housing, Slotted Nylon Race
Bearing Race: slotted nylon
Ball: heat treated, hard chrome plated bearing steel
Finish: bright polished chrome
Housing: 4130 heat treated chrome moly steel
Application: Our chromoly rod MXM rod ends are ideal for most automotive after market suspensions such as control arms, end links.
Ultimate Static Load Rating 3/4 : 25,489 lbs
Ultimate Static Load Rating 5/8 : 19,751 lbs
Steering Column kit
Steering column kit
Bolts to any 1.5 inch roll cage tubing includes the following :
- 44" of steering shaft
- 1 column mount
- 1 sweet u-joint
- 1 firewall bearing
- 1 quick release "Option"
$75.00 Sale price$69.49
New release of our FDF Hoodie
made from the highest quality, long torso hoodie, these are maximum comfort and fit with the FDF mantis design.
the 2 style options are
1- Japanese Mantis lettering on the left arm
2- "Driver Inspired" on the left arm (this was the Original slogan for FDF back when we started, Driver inspired is the root of all FDF products meaning they are tested, designed and built by drivers. With the Owner (Josiah Fallaise) making his debute in FD this year we are getting ready to have the merch so you can support
Machined from 6061-T6 aluminum is our Billet adjustable splitter rods, these are lightweight, easy to install and even easier to adjust. Use these to support and/or pitch your front or rear splitter/diffuser. Select a length from our options or if you need a custom length let us know by selecting "custom length" and send us an email along with your order.
available lengths are + or - 7/8" for example if the length you select is 7", your adjustment range will be from 6-1/8" to 7-7/8" a total of 1-3/4"
the price is for 1 assembly, this includes everything in the pictures displayed
FDF race shop hat
$40.00 Sale price$29.99
FDF race shop hat
-Snap back, nardo grey hat with black lettering,
-Includes "race shop" on the drivers side
-Instant respect from the drift gods
FK rod end/heim joint
$59.99 Sale price$41.59
The FK rod end bearings are the premium option for our angle kits that offer supior bearing life, extreme strength and a smooth feel. we offer them in 2 sizes, both left hand (LH) and right hand (RH)
the JMX10 is a PTFE lined 5/8-18 bearing with a yield strength of 17,959 lbs
the JMX12 is a PTFE lined 3/4-16 bearing with a yield strength of 28,090 lbs