Toyota Supra/Soarer Mantis Angle Kit
New On-Car V2 Angle kit is currently in testing and will be releasing shortly. This will effect shipping times.
The Mantis angle kit for the Supra/Soarer is the most relevant angle kit in today's drift society, and here's why:
-Angle, 70+ degrees
-Ackerman, Anti/Pro ackerman adjustable
-Roll Center, 50mm Roll center adjustment
-Bump steer, minimal bump steer in drift by perfecting tie-rod pitch angle
-Caster, optimized caster for lead and trail wheel contact, with built in trail to the knuckle adaptor
-Camber, optimized camber at to counteract caster at full lock.
-Track Width, adjustable range from 50mm-75mm wider per side creating a stable and high clearance front end
-Suspension Travel, long travel range, full lock to lock at max droop and max compression
-Joints, Chromoly 3 piece Heim joints and spherical bearings
-Weight Reduction, 7075 aluminum and Alloy steel used wherever possible for the lightest and strongest design.
Full kit
2- mantis LCA
2- mantis UCA
2- inner tie rods
2- knuckles adaptors
2- outer tie rods
All hardware required for install included.
Please allow 3-4 weeks of fabrication before the item is sent.