The Mantis Kit for the Subaru Impreza is the most relevant angle kit in today's drift society.
Key Features:
-
Angle: 65+ degrees depending on your wheel setup and length of control arms
-
Tie-rods, Outer tie-rods included, these fasten to the stock inner tie-rods
-
Ackermann: Adjustable Ackermann options from Positive - zero - negative
-
Roll Center: Optimized handling by adding 50mm of roll center correction.
-
Bump steer: Perfected bump steer for drifting.
-
Caster: Modifications made to the displaced caster amount giving a good self-steer feel for the driver and maximizing the performance for drifting.
-
Camber: Optimized camber ranging from -3 to -6.
-
Track Width: 50-75mm wider per side creating a stable and high clearance front end.
-
Suspension Travel: Long travel range, full lock to full lock at any point throughout suspension travel for increased grip.
-
Joints: Chromoly heim joints, and spherical bearings with self-lubricating nylon race, easily replaceable.
-
Weight Reduction: Compact drop knuckle design makes for a lightweight and strong design. 7075 aluminum is used where possible which provides steel-like strength at 40% weight reduction.
Wheel Bearing:
-
5x10: You can use the OEM bearing or an FRS/BRZ wheel bearing. If you use the OEM wheel bearing then you must also run a cut axle spline in the bearing.
-
"350z" 5x114: This uses a 350z wheel bearing. you must also run this setup with a 350z rotor and the STI caliper.
Note: Wheel Bearing not included.
Note: For custom colors, please list it within the order notes.
Note: Please allow 3-4 weeks build time.
Why Choose FDF?
-
Driver-inspired designs: Our products feature innovative, driver-inspired designs tailored for performance and style.
-
High-quality materials: We use only high-strength alloys to ensure the durability and superior quality of our products.
-
Made in North America: Our products are proudly made in-house in North America, ensuring exceptional craftsmanship and reliability.
