C6 Corvette Pro Grip Kit

The FDF Pro Grip Kit is designed specifically for drifting. This kit offers adjustable anti-squat, the most user-friendly camber adjustment available, and the quickest control arm removal system, ensuring repairs can be made after an impact in 5 minutes or less. Additionally, we rotated the ball joints 90 degrees so in the event of an impact, the knuckle cannot rotate more than 20 degrees, saving your axle and brake lines. on the OEM knuckles, when the toe arm fails from an impact, the knuckle can rotate 90 degrees and will destroy your brake lines and axles. 

Key Features:

• Grip: Maximize tire efficiency. 
• Camber: Easily optimize your camber using our smooth adjuster design on either the upper or lower control arm, no need to unbolt anything to make these changes.
• Toe: Shims on the knuckle enable you to raise or lower the outer tie rod, increasing or decreasing toe gain under compression. This feature boosts on-throttle grip and, when combined with the adjustable anti-squat, controls toe during acceleration.
• Anti-Squat Control: The kit includes a unique bracket design that attaches to the subframe, offering four positions to modify your anti-squat. It requires some drilling but is worth the effort, especially when used with toe gain adjustments.
• Camber Curve: The knuckle geometry has 2 options to control camber gain and roll center This will allow you to set up the car for better side bite grip, and camber control to optimize the tire. do this by raising or lowering the pickup point from the knuckle to the upper control arm. 
• Roll Center: The rear kit adjusts the roll center to optimize a pro drift car's ride height. Acting like a geometric sway bar, it maintains camber, tire contact, and grip in the chassis throughout corners and drifting. When paired with a sway bar, it becomes a significant advantage.
• Sway Bar Options: This kit includes attachment points on both the upper and lower parts, catering to sway bar options on a professional car. This feature is designed considering users might run a completely custom sway bar, as seen on Josiah's Pro C6.
• Dual Caliper Bracket Options: The kit offers three choices for rear brakes. The first is the OEM foot brake. The second combines an OEM foot brake with a secondary 4-piston Wilwood handbrake. The third option is a dual Wilwood caliper setup. All options are compatible with the knuckle and can be added or changed later.
• Travel Range: The kit's travel range has been expanded, allowing up to 2 inches more than OEM and aftermarket suspensions. A further travel option is available through special order, requiring custom coilovers similar to those on Josiah's C6. Nevertheless, this is a significant improvement in the travel range department.

Note: Orders require 3-4 weeks for fabrication before shipping.

Note: Not compatible with C6 Z06.

Installation Manual

Why Choose FDF?

• Driver-inspired designs: Our products feature innovative, driver-inspired designs tailored for performance and style.
• High-quality materials: We use only high-strength alloys to ensure the durability and superior quality of our products.
• Made in North America: Our products are proudly made in-house in North America, ensuring exceptional craftsmanship and reliability.