BRZ/FRS/GT86 Rear Arm Bundle

This bundle includes a Rear Toe Arm, Rear Lower Control Arm & a Rear Traction Arm. 

Note: For custom colors, choose one from Prismatic Powders. Please list the item code and name within the order notes. (Custom color only applies to the Rear Lower Control Arm & Rear Traction Arm). 

Note: Orders require 2–3 weeks for fabrication before shipping.

BRZ/FRS/GT86 Subaru Impreza Rear Toe Arm

These arms are used to adjust your toe, primarily used when lowering the car (or lifting). They feature a very strong and lightweight design, using 7075-T6 aluminum. The total weight per arm is 1.55lbs(0.7KG) making them lighter than the OEM arms.

This product includes 2 arms, and all required hardware to install. 

Key Features:

• Adjustable: Able to adjust toe using a Left and right hand threaded body
• Durable, Lightweight, & Reliable: Made out of high-strength alloy Aluminum

Arms will also fit:

• 2013+ Scion FRS
• 2013+ Subaru BRZ
• 2010-2014 Subaru Legacy Outback
• 2010-2014 Subaru Legacy Sedan B4
• 2010-2014 Subaru Legacy Outback
• 2011+ Subaru Impreza XV Crosstrek
• 2008-2014 Subaru Impreza WRX
• 2008-2014 Subaru WRX STi Hatchback
• 2008-2014 Subaru WRX STi Sedan

BRZ/FRS/GT86/Impreza Rear Lower Control Arm

Our new Rear Lower Control Arm combines the best range of adjustability, strength, and performance in one clean design. Using our Uniball billet block and shims instead of jam nuts, this arm offers the most rigid adjustment method for racing. no bending, loosening, or flexing. The arm weighs a total is 3.65lbs (1.65KG) each making it lighter than the OEM and competitors arms.  
Multiple mounting points for the shock and sway bar allow you to fine-tune motion ratio, ride height, and suspension behavior without affecting coilover travel. Whether you’re dialing in your grip setup or adjusting stance, this arm makes every change easy and precise.

Arms will also fit the following and more if you cross reference your chassis:

• 2013+ Scion FRS
• 2013+ Subaru BRZ
• 2010-2014 Subaru Legacy Outback
• 2010-2014 Subaru Legacy Sedan B4
• 2010-2014 Subaru Legacy Outback
• 2011+ Subaru Impreza XV Crosstrek
• 2008-2014 Subaru Impreza WRX
• 2008-2014 Subaru WRX STi Hatchback
• 2008-2014 Subaru WRX STi Sedan

Key Features:

• Uniball shim-block design for quick, accurate adjustments

• Extra knuckle mounting holes to fine-tune ride height and geometry

• Stronger material than chromoly and lightweight

• Optimized motion ratio and sway bar pick up points

• Easy install using factory hardware

• Perfect for both drift and road race setups

The arms will also fit:

• 2013+ Scion FRS
• 2013+ Subaru BRZ
• 2010-2014 Subaru Legacy Outback
• 2010-2014 Subaru Legacy Sedan B4
• 2010-2014 Subaru Legacy Outback
• 2011+ Subaru Impreza XV Crosstrek
• 2008-2017 Subaru Impreza WRX
• 2008-2014 Subaru WRX STi Hatchback
• 2008-2014 Subaru WRX STi Sedan

BRZ/FRS/GT86 Subaru Impreza Rear Traction Arms

Our Rear Traction Arm gives you the control to center your wheel perfectly in the wheel well after lowering your car. Featuring the same shim-block and uniball system as our other rear arms, it allows easy fine-tuning of arm length and wheel position without sacrificing strength or precision. The traction arm weights 2.6lbs (1.17KG) per arm making it extremely light for its strength. 
The arm offers 22mm of total adjustment, ensuring proper alignment and wheelbase correction for both grip and drift applications. Plus, all our new arms share the same shim system — meaning you can adjust your entire rear suspension setup with one set of shims.

Arms will also fit the following and more if you cross reference your chassis:

• 2013+ Scion FRS
• 2013+ Subaru BRZ
• 2010-2014 Subaru Legacy Outback
• 2010-2014 Subaru Legacy Sedan B4
• 2010-2014 Subaru Legacy Outback
• 2011+ Subaru Impreza XV Crosstrek
• 2008-2014 Subaru Impreza WRX
• 2008-2014 Subaru WRX STi Hatchback
• 2008-2014 Subaru WRX STi Sedan

Key Features:

• Precise wheelbase and traction adjustment

• Shim-block design shared across all rear arms

• Shorter base length than OEM for better wheel centering

• Around 1" total adjustability range

• Built for high-performance grip and drift use

Note: For custom colors, choose one from Prismatic Powders. Please list the item code and name within the order notes.

Note: Orders require 2–3 weeks for fabrication before shipping.

Why Choose FDF?

• Driver-inspired designs: Our products feature innovative, driver-inspired designs tailored for performance and style.
• High-quality materials: We use only high-strength alloys to ensure the durability and superior quality of our products.
• Made in North America: Our products are proudly made in-house in North America, ensuring exceptional craftsmanship and reliability.