The Mantis Kit for the Corvette C7 is the most relevant angle kit in today's drift society, and here's why:
-Angle, 65+ degrees depending on your wheel setup and length of control arms
-Tie-rods, Outer tie-rods included, these fasten to the stock inner tie-rods
-Ackerman, adjustable Ackerman options from Positive - zero - negative
-Roll Center, optimized handling by adding 25mm of roll center correction allowing for a longer shock/spring if required
-Bump steer, perfected bump steer for drifting
-Caster, modifications made to the displaced caster amount giving a good self-steer feel for the driver and maximizing the performance for drifting
-Camber, optimized camber ranging from -3 to -6
-Track Width, 25-75mm wider per side creating a stable and high clearance front end
-Suspension Travel, long travel range, full lock to full lock at any point throughout suspension travel for increased grip
-Joints, Chromoly Heim joints, and spherical bearings with self-lubricating nylon race, easily replaceable
-Weight Reduction, compact drop knuckle design makes for a lightweight and strong design, 7075 aluminum used where possible which provides steel-like strength at 40% weight reduction.
Please allow 2-3weeks of fabrication before the item is sent.