Smalls

Adjustable sway bar links

These Adjustable links are a high quality Chromoly female and male rod end. They are length adjustable and a universal way to connect your sway. Adjustable sway bar links are also used to load one side of the car vs another, this can be beneficial when corner balancing a car, or setting up your car to handle different tracks. 

They use m12 hardware (bolts and nuts) 

The length range is from 3.3" - 4.4" centre of bearing to centre of bearing.

The FDF Toe Plates are the quickest and simplest way to measure toe at home or at the track.

You can choose to buy with or without two Lufkin measuring tapes.

Please allow 1 week before shipping.

Quick Release:

Splined Quick Release with weld on male side to adapt to any 3/4" steel steering shaft.

Lockout bolts and stainless washers for the rear of your S-chassis, R-chassis, or Z32. 

These bolts can be installed on the camber arms and toe arms of your rear suspension to prevent the eccentric OEM bolts from moving under heavy load. These are designed to be used with any adjustable arms.

Aluminum solid bushings to replace the rubber bushing on C5/C6 BC-racing coil overs

The FDF C6 corvette fire wall block off plates include all pieces required to cover the holes passing through to the engine bay.  Pre Drilled holes are provided for easy marking and drilling, the prefered method of installation is using rivets or panel bond. Rivets are not included. These are an FD legal product.

The Lockout kit for the 2009-2015 Cadillac CTS-V is designed to eliminate the movement of the front lower control arms in the subframe.  

All hardware and plates are included, with an installation video below. 

The FDF C5/C6 conversion is a transfer drill plate that is easily bolted to the factory wheel bearing and provides transfer holes for a 14mm drill bit. This is the size required to press in new ARP wheel studs. It is recommended that a shop do this and at a minimum, use a drill press to ensure that the holes are perpendicular to the bearings mounting face. 

The studs that work well for this install are ARP-100-7717 and can be purchased on summit racing

The plate can come with a 14mm drill bit if selected 

Please allow 2-3 weeks before shipping

The FDF Lockout kit is the perfect solution for maintaining your alignment under hard driving. 

The kit features 3 position, stainless steel locking plates, so you still have adjustments to set your camber where you want.

The kit includes:

4- grade 10.9 bolts

8- stainless steel locking plates

8- washers

4- nylock nuts 

Corvette shims to space out the front upper control arm on the C5/C6 chassis.

Waterjet cut shims designed to slide in between the chassis and upper mounts

price is per set of 2 shims. 

The FDF hydro mount plate for the Ford Mustang S197 fits from 2005-2014, and bolts directly to available holes on the transmission tunnel surrounding the shifter. It comes with pre made holes that line up with most aftermarket handbrakes and puts the handbrake in the perfect position for easy pulling while drifting.

Our new Aluminum Dual Caliper Brackets for the Genesis chassis. Made out of 6061 Billet Aluminum and made entirely in house. 

Comes with required hardware to install.

Fits both Brembo and Non-Brembo Calipers.

Some trimming may be needed on the knuckle.

Please allow 2 weeks for fabrication before the product ships.

The Hyundai Genesis hydro plate allows you to easily bolt a handbrake in your car using the factory shifter holes provided.

This bracket will require you to either trim or remove your centre console plastics. 

The IS300 hydro plate allows your to easily bolt a handbrake in your car using the factory shifter holes provided.

This bracket will require you to either trim or remove your centre console plastics.

The FDF handbrake mounting plate is a direct fit, billet aluminum plate that uses the factory shifter mounting points to secure a hydro in place. 

The plate is anodized black for a durable finish. 

Our handbrake and many others will line up with the provided holes and without any modifications, bolt right in. 

CANADIAN PRICES

350z shifter mount plate makes for a clean install of a perfectly located handbrake. 

Price is for a pair*

These dual caliper brackets allow you to attach a second set of calipers that you can use as a hydro handbrake.

They are designed to form perfectly to the OEM knuckle making it easy to weld on, and have a locating tab at the top of the bracket to make sure they are in the correct position. 

Material is 6061 Aluminum.

Recommended method of welding - TIG.

*Clean knuckle surface well before welding

Why would you use these over a bolt on bracket? 

Bolt on brackets add 8mm of track width per side and extend the axles which sometimes require axle spacers. 

Aluminum Dual Caliper Brackets for all S-Chassis, R-Chassis and Z-Chassis.

For use with Z32 dual piston caliper and stock rotor (same as r32,r33,r34, and jdm s14/s15)

Comes with all hardware required for install.

This kit works with Brembo and Non Brembo Calipers.

Billet aluminum.
Comes with grade 10.9 hardware.

You will need the same generations of caliper and rotors. You must use 03-05 calipers and rotors together or 06+ together. You can't use 03 calipers on 06 rotors.

 Dual Caliper brackets are in stock and will ship within 1 day of order.

The FDF Axle spacers are designed to prevent axle failure on lower or higher horsepower cars. The idea is to maintain the factory axle length, and have full CV engagement. 

These adaptors are precisely machined to centre perfectly on the diff and axles, safely extending them. 

Included in the kit is:

12 - Grade 10.9 bolts

2 - Spacers