Corvette C5/C6 Mini Mantis Angle Kit

$540.47

C5/C6 angle kit solutions that are affordable and have the perfect Ackerman

Re-drilled knuckles have too much positive Ackerman, there is no option to correct this as the hole can only be drilled where there is enough material, and other adaptors available have too much negative Ackerman because they only fit in one location on the C5/C6 knuckle. Currently nothing available for C7 other than drilled

This design has 2 tierod location options, the first is a moderate increase in angle for those with OEM arms (measured at 50 degrees of lock) and the second position is for a full 70 degrees of lock, that can be used with aftermarket arms of any brand

The brackets are made from high-strength, Alloy steel and 7075 aluminum. making them a lightweight and robust design.

Please allow 2 weeks before for build/ship time until we have them in stock.

For the options, select the control arms that you are using. this will determine what length tierod bodies we need to include

Installation Manual

Corvette C7 Mini Mantis Angle Kit

$545.86

C7 angle kit solutions that are affordable and have the perfect Ackerman

-(redrilled knuckles have too much positive Ackerman, there is no option to correct this as the hole can only be drilled where there is enough material, and other adaptors available have too much negative Ackerman because they only fit in one location on the C5/C6 knuckle. currently nothing available for C7 other than drilled)

This design has 2 tierod location options, the first is a moderate increase in angle for those with OEM arms (measured at 50 degrees of lock) and the second position is for a full 70 degrees of lock, that can be used with aftermarket arms of any brand

The brackets are made from high-strength, Alloy steel and 7075 aluminum. making them a lightweight and robust design.

Please allow 2 weeks before for build/ship time until we have them in stock.

.

Installation Manual

Corvette C5/C6 Mild Mantis Angle Kit

$714.48

C5/C6 Mild Angle Kit is the perfect in between solution for your Corvette that offers adjustable ackerman and maintains the OEM knuckles. You simply just need to cut the OEM knuckles tierod mount off to install. The reasons for buying this option are listed in point form below:

1- If you have Modified Knuckles: the mounting point is already gone, this rules out the ability to run our mini mantis kit, which makes this option perfect for you.

2- Adjustable Ackerman: The kit is capable of running positive, zero, and negative ackerman and is easily adjusted.

3- Shorter Steering Ratio: Then the Mini Mantis Kit and modified knuckles. What this means is this kit is capable of getting more steering angle. Your limiting factors will now be your wheel selection and control arms.

The kit comes with all the hardware required to install and align the car, just select the options above. It is strongly recommended that you only buy this option with our lower control arms, or if you already have high clearance lower control arms, the wheel will hit OEM lower control arms.

Nissan 370z/ Infiniti G37 Mini Mantis Angle Kit

$368.73

The FDF Mantis kit for the 370Z/G37 allows up to 65 degrees of angle, with zero Ackermann, it quickens the steering ratio by relocating the tie-rod pickup point on the knuckle, perfecting the bump steer and allowing for a ton of angle, and is fabricated using high-strength alloy steel.

*Note, G37 Sedan uses a different steering rack than the coupes*

Allow 2 week build time.

Nissan 370z/ Infiniti G37 Mini Mantis Angle Kit

IS300 / JZX90 / JZX100 Mini Mantis Angle Kit

$992.69

The IS300 / JZX90 / JZX100 Mini Mantis angle kit is a unique option for the chassis, that utilizes a lower control arm adaptor, and steering knuckle adaptor. this design gives the the chassis's a control arm extension of 35mm, and bolts on, no cutting or welding anymore to lengthen the stock arm. the other benefit is the knuckle adaptor, gives you roll center correction and a shorter steering ratio for increased angle. it is ackermann adjustable, and has an integrated bump stop to adjust for your angle needs. These items can also be used to further evolve the kit in to our MILD or even our MEGA mantis kit, as they utilize a lot of the same parts.

The MINI kit can be used with factory or aftermarket caster/compression arms, if you want to run the FDF compression arms, you can order separately later on.

-Angle, 55 degrees + depending on your steering rack offset and wheel setup

-Tie-rods, the kit includes tie rod adaptors to connect to the knuckle

-Ackermann, adjustable ackermann (other settings offered upon request)

-Roll Center, optimized handling by adding 30mm of roll centre correction

-Bump steer, corrected bump steer for a lowered ride height

-Caster, optimized caster and trail for the best alignment torque feedback

-Camber, optimized camber ranging from -3 to -6

-Track Width, 35mm wider per side creating a stable and high clearance front end

-Suspension Travel, long travel range, full lock to full lock at any point throughout suspension travel for increased grip

-Joints, Chromoly heim joints and spherical bearings with self lubricating nylon race, easily replaceable

-Weight Reduction, compact drop knuckle design makes for a lighter and stronger design, scissor frame constructed arms with crumble zone to save mounting points from failing under impact, 7075 aluminum used where possible which provides steel like strength at 40% weight reduction.

NOTE* this kit must be run with some form of adjustable upper control arms or extended upper control arms to have the recommended camber range of -3 to -6 degrees (-6 is the maximum we recommend)

Please allow 2-3 weeks of fabrication before the item is sent.