The IS300 / JZX90 / JZX100 Mega Mantis angle kit is a unique option for the chassis, that utilizes a full knuckle replacement. This allows the user to run a 350z bolt on wheel bearing, 350z calipers and 350z rotors. The Nissan 350z hub is cheap, more reliable and easier to replace making it a better option to hold your wheel to the suspension. The brake options available for the 350z are also better, with Brembo 4 piston calipers being an OEM option. This does make the kit more costly to run, but overall is a more reliable and higher performance setup.
-Angle, 70 degrees+ depending on your steering rack offset and wheel setup
-Tie-rods, the kit includes tierod adaptors to connect to the knuckle
-Ackermann, adjustable ackermann (other settings offered upon request)
-Roll Center, optimized handling by adding 50mm of roll centre correction
-Bump steer, corrected bump steer for a lowered ride height
-Caster, optimized caster and trail for the best alignment torque feedback
-Camber, optimized camber ranging from -3 to -6
-Track Width, 50mm wider per side creating a stable and high clearance front end
-Suspension Travel, long travel range, full lock to full lock at any point throughout suspension travel for increased grip
-Joints, Chromoly heim joints and spherical bearings with self lubricating nylon race, easily replaceable
-Weight Reduction, compact drop knuckle design makes for a lighter and stronger design, scissor frame constructed arms with crumble zone to save mounting points from failing under impact, 7075 aluminum used where possible which provides steel like strength at 40% weight reduction.
Please allow 2-3 weeks of fabrication before the item is sent.