The Mantis Kit for the 350Z/G35 is the most relevant angle kit in today's drift society, and here's why
-Angle, 63 degrees
-Ackerman, 4 degrees ackerman per side (lead wheel at 63, trail wheel at 59) with our offset rack spacers.
-Roll Center, stock roll center using factory knuckle
-Bump steer, minimal bump steer in drift by perfecting tierod pitch angle
-Caster, factory caster when using stock UCA or adjustable caster when paired with FDF UCA
-Camber, optimized camber at -5.5 to counteract caster at full lock.
-Track Width, adjustable range from 25mm-50mm wider per side creating a stable and high clearance front end
-Suspension Travel, long travel range, full lock to full lock at any point throughout suspension travel for increased grip
-Joints, Chromoly heim joints and spherical bearings with self lubricating nylon race, easily replaceable
-Weight Reduction, scissor frame constructed, 7075 aluminum used where possible which provides steel like strength at 40% weight reduction.
Lower arms kit includes
2- mantis arms 2- inner tie rods 2- knuckles adaptors plates 2- outer tie rods 2-offset rack spacers all hardware required for install included
Lower + upper control arms kit
includes adjustable uppers in addition to all lower parts
For custom colors, email your order number and the color wanted
Please allow 2-3weeks of fabrication before the item is sent.