Subaru Impreza 2002-2007 Mantis Angle Kit

Regular price $2,017.04 Save Liquid error (snippets/product-template line 123): Computation results in '-Infinity'%
-70 in stock

The Mantis Kit for the Subaru GD is the most relevant angle kit in today's drift society, and here's why:

-Angle, 65+ degrees depending on your wheel setup and length of control arms

-Tie-rods, Outer tie-rods  included, these fasten to the stock inner tie-rods 

-Ackerman, adjustable Ackerman options from Positive - zero - negative 

-Roll Center, optimized handling by adding 50mm of roll center correction

-Bump steer, perfected bump steer for drifting

-Caster, modifications made to the displaced caster amount giving a good self-steer feel for the driver and maximizing the performance for drifting

-Camber, optimized camber ranging from -3 to -6

-Track Width, 50-75mm wider per side creating a stable and high clearance front end

-Suspension Travel, long travel range, full lock to full lock at any point throughout  suspension travel for increased grip 

-Joints, Chromoly heim joints, and spherical bearings with self-lubricating nylon race, easily replaceable 

-Weight Reduction, compact drop knuckle design makes for a lightweight and strong design, 7075 aluminum used where possible which provides steel like strength at 40% weight reduction. 

Options 

5x100- you can use the OEM bearing or an FRS/BRZ wheel bearing. If you use the OEM wheel bearing then you must also run a cut axle spline in the bearing 

"350z" 5x114 - this uses a 350z wheel bearing. you must also run this setup with a 350z rotor and the STI caliper

*Wheel Bearing not included*

Please allow 3-4 weeks build time

Subaru Impreza 2002-2007 Mantis Angle Kit
Subaru Impreza 2002-2007 Mantis Angle Kit
Subaru Impreza 2002-2007 Mantis Angle Kit
Subaru Impreza 2002-2007 Mantis Angle Kit