Mazda

Universal hood vents or send us an email for a custom size!

We can also scale the available sizes to fit your application. For example, if you wanted the Curved design, but only 24" tall, we would simply scale it down to that size. The widths will also get smaller with the scale. 

-26" tall 
-30" wide top 
20.5" wide bottom

Ball Bearing FDF Handbrake

The new design features 2 press in ball bearings for an instant lock and zero slop design, fixing the unstable feel you get with almost every handbrake available.

The handle itself is 18" tall, and features 2 aluminum plates that bolt on the outside using stainless steel button head bolts for a clean look. The plates will come raw finish, as well as the main body.

Please allow 2-3weeks of fabrication before the item is sent.

The FK rod end bearings are the premium option for our angle kits that offer supior bearing life, extreme strength and a smooth feel. We offer them in 2 sizes, both left hand (LH) and right hand (RH).

The JMX10 is a PTFE lined 5/8-18 bearing with a yield strength of 17,959 lbs.

The JMX12 is a PTFE lined 3/4-16 bearing with a yield strength of 28,090 lbs.

Chromoly Housing, 3 piece high-performance Teflon race

Bearing Race: 3 piece teflon

Ball: heat treated, hard chrome plated bearing steel

Finish: bright polished chrome

Housing: 4130 heat treated chromoly steel

Application: Our Chromoly rod ends are ideal for automotive after market suspensions such as control arms, end links and ball joints. 

Ultimate Static Load Rating 3/4 : 25,489 lbs

Ultimate Static Load Rating 5/8 : 19,751 lbs

Our rigid tie-rod for the FDF Mantis kits.

Quantity- Price is for 1 tie-rod 

Material- 7075 Aluminum

Benefits over regular tie-rods  

• Very stiff design, does not flex like the thin steel tie-rods, this improves handling.
• Machined fail point to save your steering rack on impact.
• Stronger than steel but super lightweight.

We have 7 lengths that currently go with there corresponding angle kits, please select one of the 7 options for your kit

4.5" long (these have a m14x1.5 RH thread, and a 5/8-18 LH thread)

-Corvette, S197, Genesis

6.5" long (these have a m14x1.5 RH thread, and a 5/8-18 LH thread)

- S550, SN95, 370Z mini

8.5" long (these have a m14x1.5 RH thread, and a 5/8-18 LH thread)

-E36, FRS base, 

9.5" long (these have a 5/8-18 RH thread, and a 5/8-18 LH thread)

- 350Z reg

10" long (these have a m14x1.5 RH thread, and a 5/8-18 LH thread)

-E46

11.5" long (these have a 5/8-18 RH thread, and a 5/8-18 LH thread)

-240sx, 350z mega, is300/jzx, 

13" long (these have a 5/8-18 RH thread, and a 5/8-18 LH thread)

-E46 full tierod setup, frs power kit, 

Steering column kit  includes the following:

 -Bolts to any 1.5 inch roll cage tubing

- 44" of steering shaft 

- 1 column mount

- 1 sweet u-joint

- 1 firewall bearing 

- 1 quick release "Option"

-Comes in pair

-Universal fit

-High quality wrap sticker

FDF Raceshop Hats

1. Snapback, Black hat with white lettering

2. Snapback, Nardo Gray hat with white lettering

-Includes "race shop" on the drivers side 

-Instant respect from the drift gods

The FDF Toe Plates are the quickest and simplest way to measure toe at home or at the track.

You can choose to buy with or without two Lufkin measuring tapes.

Please allow 1 week before shipping.